Changing Channel Mixing And End-Points; Flying Wings - Team Blacksheep TBS TANGO 2 Radio Manual

Changing channel mixing and end-points

For detailed channel mixing, rates, and end-point settings, it is recommended to set up these on the flight
controller side (CleanFlight, BetaFlight, RaceFlight, APM, PX4, Pixhawk, etc.), for anything else than flying
wings.

Flying Wings

The TBS TANGO 2 supports channel mixing for flying wings. The mixing, end-point, and reverse settings can
be configured in channel settings after you have set up a new flying wing model.
If you create a new model, you can follow the wizard which will help you set it up by selecting Delta as
type.
1. Quick-press the Menu button to enter the
Model Setup
2. Change to the Mixer screen by pressing the
Page-button
3. Use the Rocker and Enter-switch to select a
channel
More information can be found in relevant online
tutorials explaining the operating and mixing
principles of OpenTX
12