Bandwidth Limit - Draytek Vigor 5510Gi User Manual

To activate the function of limit session, simply click Enable and set the default session
limit.
Enable
Disable
Default session limit
Limitation List
Start IP
End IP
Maximum Number
Add
Edit
Delete
Index (1-15) in Schedule
Setup
3 . 8 . 2 B a n d w i
3 . 8 . 2 B a n d w i
The downstream or upstream from FTP, HTTP or some P2P applications will occupy large
of bandwidth and affect the applications for other programs. Please use Limit Bandwidth to
make the bandwidth usage more efficient.
92
d t h L i m i t
d t h L i m i t
Click this button to activate the function of limit session.
Click this button to close the function of limit session.
Defines the default session number used for each computer in
LAN.
Displays a list of specific limitations that you set on this web
page.
Defines the start IP address for limit session.
Defines the end IP address for limit session.
Defines the available session number for each host in the
specific range of IP addresses. If you do not set the session
number in this field, the system will use the default session
limit for the specific limitation you set for each index.
Adds the specific session limitation onto the list above.
Allows you to edit the settings for the selected limitation.
Delete the selected settings existing on the limitation list.
You can type in four sets of time schedule for your request.
All the schedules can be set previously in Application –
Schedule web page and you can use the number that you have
set in that web page.
VigorPro5510 Series User's Guide