Draytek Vigor 5510Gi User Manual page 92

Profile Name
Protocol
Action
Enable Virus Scan
Enable Log
84
Type a name for the profile.
Currently, only the files transmitted through the protocols
listed in this page including SMTP, POP3, IMAP, HTTP
and FTP will be scanned by this router.
Choose the action that you want to apply to the protocols of
each operation.
Pass - Detect if there is any virus for your reference. The
system will not do any advanced action for such condition.
Destroy- Destroy the infected file found by the router system.
Reset - Break down the communication between your
computer and specific link which might have virus included.
Check this box to enable the general virus scan procedure for
different protocols.
In order to show the virus detection log on the window of
Draytek Syslog, you have to check the log box here and
enable the SysLog Access Setup from System Maintenance
>> Syslog/Mail Alert.
VigorPro5510 Series User's Guide