DIMENSIONS
Sensor body
A
B
F3.00.W Paddlewheel Flow transmitter
Receiver PCB
C
D
Receiver + DIN bar adapter
INSTALLATION
System Location
• Nominal distance: 100m (maximum, open field)
• Operating distance is reduced by following elements:
- tank with liquid
- concrete walls
- fire doors
- metal doors
- metal panels
• Optimal installation conditions:
- indoor ambient
- the receiver must face the transmitter. To identify the proper position please
refer to the FIP mark on the box cap. Receiver must face the left side of FIP
mark (see the image below)
Sensor body PVCC, PVDF, 316L SS
1
2
O-Ring (EPDM or FPM)
Halar Rotor, Ceramic shaft & bearings
3
for PVDF and PVC-C version and 316 SS
shaft for metal version
4
ABS cap for installation into fittings
Electronic box
5
6
PCB
Connectors
7
DIN bar case adapter
8
5