Uniden iGO CAM 75 Owner's Manual page 13

Recording
Playback
Parking Mode
UNIDEN iGO CAM 75/75R
Mirror Rear Enable to display and record in mirrored
Image image for rear and internal camera.
Disable to display and record in real image
for rear and internal camera.
Motion Enable this setting to allow the unit to record
Detection only when only the front camera detects
movement.
WDR Enable/disable the Wide Dynamic Range
(WDR) feature to improves the overall
exposure throughout your entire image.
Anti-Flicker Change depending on the electrical power
frequency in your area (Default setting is
50Hz and you may not have to change this
setting).
G Sensor This functions helps protect/lock video
files in case of a sudden impact/collision.
You can change the sensitivity level of the
G-sensor.
Exposure Set the brightness sensitivity for better effect
in different lighting condition
Normal Normal video recordings are save in this
Recording folder.
Event Locked/event recordings are save in this
Recording folder.
Photo All the snapshots are save in this folder.
Parking mode only works with the optional
Hard Wire Kit (HWK-2). The unit must have
sufficient external power supplied in order to
record in parking mode.
Impact Detection:
This mode turns on the unit if it detects
impact and will record for 60 seconds.
Time Lapse Recording:
Once the ACC current is cut off, the unit
will start time-lapse recording (1 fps and
playback in 30fps).
13
Vehicle Recorder