Sony STR-DA3400ES Operating Instructions Manual page 11

Remote commander
You can use the supplied RM-AAL017
Remote Commander to operate the receiver
and to control the Sony audio/video
components that the remote is assigned to
operate (page 122).
RM-AAL017
THEATER
SHIFT TV
1 2
VIDEO1 VIDEO2
4 5
SAT TV
7 8
TUNER PHONO
-/-- 0/10
HDMI1 HDMI2
XM SIRIUS
2CH/
A.DIRECT A.F.D.
INPUT
RESOLUTION MODE
HOME
CATEGORY
TUNING CATEGORY MODE
DISC SKIP
BD/DVD
TOP MENU MENU
MACRO 1 MACRO 2
ZONE AMP
3
TV INPUT
BD DVD
6
WIDE
MD/ SA-CD/
TAPE CD
9
D.TUNING
MULTI
DMPORT
IN
ENT/MEM CLEAR
HDMI3 HDMI4
SOURCE
MOVIE MUSIC
NIGHT
SLEEP MODE
GUI
MODE
TUNING
F1 F2
Name Function
A AV ?/1 (on/
Press to turn on or off the audio/
standby) video components that the
remote is assigned to operate
(page 122).
To turn the TV on or off, press
TV (Z), then press AV ?/1.
If you press the ?/1 (B) at the
same time, it will turn off the
receiver and other Sony
components (SYSTEM
STANDBY).
Note
The function of the AV ?/1
switch changes automatically
each time you press the input
button (E).
B ?/1 (on/
Press to turn the receiver on or
standby) set it to standby mode.
If ZONE 2 is selected, only the
main receiver is turned on or off
with this button. To turn off all
Sony components including an
amplifier in zone 2, press ?/1
and AV ?/1 (A) at the same
time (SYSTEM STANDBY).
To save the power in standby
mode, set "Control for HDMI"
(page 57) and "RS-232C
Control" to "OFF" (page 58).
C ZONE
Press to light up the button to
enable the zone 2 operation
(page 103).
D AMP
Press to light up the button to
enable the receiver operation
(page 39).
E Input
Press one of the buttons to
buttons
select the component you want
b)
(TV ) to use. When you press any of
the input buttons, the receiver
turns on. The buttons are
factory assigned to control Sony
components (page 51). You can
program the remote to control
non-Sony components
following the steps in
"Programming the remote"
(page 122).
continued
11 US