Sony STR-DA3400ES Operating Instructions Manual page 106

5
Press V/v to select,
"Zone2-ON" or "Zone2-OFF",
then press
6
Press V/v/B/b repeatedly to
select item and parameter, then
press .
Multi Zone menu parameters
x Power
Lets you turn zone operation on.
• Zone2-ON
• Zone2-OFF
x Input
Lets you select the source that is output to the
zone. You can output audio and video signals
to zone 2.
x Volume
You can adjust the volume in the main zone. If
"Sur Back Assign" is set to "ZONE 2" in the
Speaker setting menu, you can also adjust the
zone 2 volume.
106 US
.
x 12V Trigger
You can turn the receiver on/off in another
zone, or select various options for use of the
12V Trigger function, as explained below.
• OFF
Lets you turn off output of 12V triggers even
when the main receiver is turned on.
• CTRL
Lets you turn the output of 12V triggers on
or off manually using the CIS command of
the IR remote.
• ZONE
Lets you turn the output of 12V triggers on
or off based on whether the selected zone is
turned on or off.
• INPUT (for "Main" only)
Lets you turn on the output of 12V triggers
when the preset input is selected.
When you select "Input", the setting display
which sets each input trigger to on/off
appears. Press V/v to select the input, then
press to check the box.
Tips
• Even when this receiver is in standby mode (press
?/1 on the remote to turned off this receiver), the
receiver in zone 2 remains turned on. To turn off all
receivers, press ?/1 and AV ?/1 on the RM-
AAL017 remote at the same time (SYSTEM
STANDBY).
• Only signals from components connected to the
analog input jacks are output through the ZONE 2
OUT jacks. No signals are output from
components connected to only the digital input
jacks.
• When SOURCE is selected, the signals input to the
MULTI CHANNEL INPUT jacks are not output
from the ZONE 2 OUT jacks even when the multi
channel input is selected. The analog audio signals
of the current function are output.
• When "Tuner" is selected; the same type of radio
station (FM/AM) selected in the main zone is set in
zone 2. However, you can select the input other
than "Tuner" in zone 2.
• When the receiver in the main zone is turned off, or
an input source other than "Tuner" is selected, you
can select a radio station from AM or FM in zone 2.
When two of the receivers in the main zone, zone 2
are turned off, you can select a broadcast from FM/
AM/XM/SIRIUS in one zone in which the receiver
is turned on.