Chapter 6: Replacing And Adding Hardware; Using Solve Online For Vxrail Procedures; Supported Hardware Components - Dell EMC VxRail E560 Series Owner's Manual

Adding or replacing hardware component procedures on your VxRail E560, E560F, and E560N appliance, such as hard disk
drives (HDDs), solid state drives (SSDs), and power supply units should be performed only by qualified personnel. For certain
hardware components, you may need to contact Customer Support for repair or replacement.
Topics:
•

Using SolVe Online for VxRail procedures

•

Supported hardware components

• System memory
•
Expansion cards and expansion card riser
Using SolVe Online for VxRail procedures
Step-by-step instructions for procedures such as replacing hardware or performing system administrative tasks are available
through SolVe Online and the SolVe Desktop application.
CAUTION: To avoid potential data loss, refer to the VxRail procedures in SolVe Online or the SolVe Desktop
application before performing any hardware replacement or upgrade activity.
Access SolVe Online for VxRail
For more information about SolVe for VxRail, refer to
You must have an online support account to use SolVe Online.
Supported hardware components
Following table describes the supported hardware components for VxRail E560 Series appliances.
Table 39. Supported hardware components
Hardware component
System Memory
Hard Drive
Solid State Drive (SAS/SATA)
Solid State Drive (NVMe)
PCIe Network Interface Cards
Micro SDHC Card
Power Supply Unit
Processors
System Motherboard
Host Bus Adapter (HBA330)
BOSS controller card and M.2 SATA disk
Network Daughter Card (NDC)
NOTE: The preceding table provides a non-exhaustive list of FRUs that reflects the common top-level assembly parts.
32 Replacing and adding hardware
Replacing and adding hardware
through your Web browser.
KB 000022572.
Customer Replaceable Unit (CRU) Field Replaceable Unit (FRU)
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
6
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes