Table of Contents
Advertisement
Locate cables: Arrow keys to switch mode, "UTP mode" to looking for
unshielded network or telephone cables, "BNC mode" for finding BNC
cable after connecting adapter. "STP mode" is used to find the shielded
network cable. Turn on the cable tracer. The round knob, if clockwise
rotation the knob to increase sensitivity, and turn it counter clockwise to
decrease the sensitivity.
Silent mode: Press the key "MUTE" for 2 seconds, and will make a sound
"Di" to start.
In silent mode, locate cable according to the indicator signal of 1-8. Press the
"MUTE" key again to exit silent mode.
Cable sequence test: When search cable, also can test UTP cable sequence.
Through the indicator to check cable sequence whether is correct. If the
indicator is "ON" , it means the cable sequence is correct.
8. U disk reading
Insert U disk to Tester's "USB" port, enter "Media player" app, can read the
23
Advertisement
Table of Contents
