Recline Adjustment; Height Adjustment - Be Cool Jupiter Manual

! Make sure that both ISOFIX connectors are securely
attached to their ISOFIX anchor points. The colors of
the indicators on both ISOFIX connectors should be
completely green. 45. -3
! Do not use shoulder belt loose or positioned under
arm.
! Do not use shoulder belt behind child's back.

RECLINE ADJUSTMENT

see images 47 - 49
47. ! Please re-check the load leg position after
reclining.
48.49. ! There are No. 4 recline angles with baby
mode and NO.1-3 positions for toddler mode , No.1-3
positions for junior I mode and No.1 positions for
junior II mode.

HEIGHT ADJUSTMENT

50. 1. Please adjust the head support and check if
the shoulder harnesses are at the correct height
according to 22-30.
2. Squeeze the head support adjustment lever
meanwhile pull up or push down the head support
until it snaps into one of the 6 positions. The head
support positions are shown as
! When the head support is adjusted to the 4th position
or higher, side wings will extend for more shoulder
space.
50. -1,
50.
EN
57