Greasing The Blower; Product Overview; Specifications; Attachments/Accessories - Toro Debris Blower 600 Operator's Manual

Note: Secure the end of the chain to the blower side
of the PTO shaft to prevent the PTO shaft from
coming apart.
3. Slowly lower the blower until the roller and caster
wheels contact the ground.
4. Remove the lynch pin and top link pin securing the
center link to the bracket.
5. Disconnect the power shaft from the tractor PTO
shaft.
6. Slide the power shaft rearward and remove it from
the tractor.
7. Remove the lynch pins and slide the lower link arms
off the hitch pins.
9

Greasing the Blower

No Parts Required
Procedure
Before operating the blower, grease the PTO shaft to ensure
proper lubricating characteristics; refer to
Machine (page 12).
Important: Failure to properly grease the unit will
result in premature failure of critical parts.

Product Overview

Specifications

Note: Specifications and design are subject to change
without notice.
Length
Width
Height
Net weight

Attachments/Accessories

A selection of Toro approved attachments and accessories is
available for use with the machine to enhance and expand
its capabilities. Contact your Authorized Service Dealer or
Distributor or go to www.Toro.com for a list of all approved
attachments and accessories.
Greasing the
10
125 cm (49 inches)
150 cm (59 inches)
117 cm (46 inches)
227 kg (500 lbs)