Ontransactionresult (Emv Only); Ondeviceextendedresponse (Emv Only) - Magtek Dynamag Instruction Manual

4 - MTSCRAEvent
Offset Field
Name
0 Message
Length
2 ARQC
Message
Return Value:
None

4.10 onTransactionResult (EMV Only)

This event is called when the device has completed the transaction and sends the transaction result to the
host.
void onTransactionResult(String data);
This notification will send a hex string for result of this transaction.
Offset Field
Name
0 Signature
Required
1 Batch Data
Length
3 Batch Data
Return Value:
None

4.11 OnDeviceExtendedResponse (Emv Only)

This event is called when the device has completed processing the command and sends the command
result to the host.
void onDeviceExtendedResponse(String data)
This notification will send a hex string for result of the extended command.
Dynamag, DynaMAX, eDynamo, mDynamo, tDynamo, DynaWave, and iDynamo 6| Secure Card Reader Authenticators | Programmer's
Reference (Java and Java Applet)
Page 45
Two byte binary, most significant byte first. This gives the total length of the
ARQC message that follows.
See 4.11Appendix D. It is expected that the host will use this data to process a
request.
This field indicates whether a card holder signature is required to complete the
transaction:

0x00 – No signature required

0x01 – Signature required
If a signature is required, it is expected that the host will acquire the signature
from the card holder as part of the transaction data.
Two byte binary, most significant byte first. This gives the total length of the
ARQC message that follows.
See 4.11Appendix F. It is expected that the host will save this data as a record
of the transaction.
Value
Value