Ontransactionresult (Emv Device Only); Onemvcommandresult (Emv Device Only) - Magtek aDynamo Manual

4 - MTSCRA Events
Offset Field Name
0 Message
Length
2 ARQC
Message

4.10 OnTransactionResult (EMV Device Only)

This message occurs when transaction result is received from the EMV device.
Parameter
sender
data
Offset Field Name
0 Signature
Required
1 Batch Data
Length
3 Batch Data

4.11 OnEMVCommandResult (EMV Device Only)

This message occurs when an EMV command result is received from the EMV device.
Parameter
sender
data
aDynamo, uDynamo, Dynamag, DynaMAX, eDynamo, BulleT, mDynamo| Secure Card Reader Authenticator | .NET/PCL Programmer's
Reference (Windows/Windows Phone)
Page 37
Two byte binary, most significant byte first. This gives the total length of the
ARQC message that follows.
Byte array containing the ARQC Message. See Appendix B for ARQC
Message Format.
Object representing the publisher of the event
Byte array containing the data received from the device. See table below for
descriptions of the data.
This field indicates whether a card holder signature is required to complete
the transaction:

0x00 – No signature required

0x01 – Signature required
If a signature is required, it is expected that the host will acquire the signature
from the card holder as part of the transaction data.
Two byte binary, most significant byte first. This gives the total length of the
ARQC message that follows.
Byte array containing the Batch Data. See Appendix D for Batch Data
Format.
Object representing the publisher of the event
Byte array containing the result code received from the device. See table
below for descriptions of the result code.
Value
Description
Value
Description