Getmagneprint; Getmagneprintlength; Getmagneprintstatus; Getencryptionstatus - Magtek Dynamag Instruction Manual

3 - MTSCRA Functions

3.40 getMagnePrint

This function retrieves MagnePrint data
String getMagnePrint();
Return Value: String containing MagnePrint data.

3.41 getMagnePrintLength

This function retrieves MagnePrint data length.
long getMagnePrintLength();
Return Value: long value indicating the length of MagnePrint data.

3.42 getMagnePrintStatus

This function retrieves MagnePrint status. See D99875475 MagneSafe V5 Communication Reference
Manual for detail.
String getMagnePrintStatus();
Return Value: String containing the MagnePrint status.

3.43 getEncryptionStatus

This function retrieves encryption status. See D99875475 MagneSafe V5 Communication Reference
Manual for detail.
String getEncryptionStatus();
Return Value: String containing encryption status.

3.44 getDeviceSerial

This function returns the device's serial number.
String getDeviceSerial();
Return Value: Returns a string. For example - "12345678"

3.45 getSessionID

This function retrieves the device session ID, which the host can use to uniquely identify a transaction to
prevent replay. See D99875475 MagneSafe V5 Communication Reference Manual for detail.
String getSessionID();
Return Value: Returns a string containing the session id.

3.46 getKSN

This function retrieves the device's key serial number (KSN) after a card swipe.
String getKSN();
Dynamag, DynaMAX, eDynamo, mDynamo, tDynamo, DynaWave, and iDynamo 6| Secure Card Reader Authenticators | Programmer's
Reference (Java and Java Applet)
Page 34