6. Remove the storage drive tray.
7. Perform the removal procedure in reverse to reinstall a new CRU.
Memory module
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
Replacement procedure
1. Remove the power cord. See "Power cord" on page 24.
2. Remove the left side cover. See "Left side cover and right side cover" on page 24.
3. Disengage the tabs on the memory modules.
4. Remove the memory module.
5. Perform the removal procedure in reverse to reinstall a new CRU.
.
Chapter 5
CRU replacement
29