Before you open the computer cover, turn off the computer and wait several minutes until the computer is
cool.
Replacement procedure
1. Remove the power cord. See "Power cord" on page 24.
2. Unlock any locking device that secures the computer cover.
3. Remove the screws from the rear of the computer case.
4. Remove the left side cover and right side cover.
5. Perform the removal procedure in reverse to reinstall a new CRU.
Front bezel
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
Before you open the computer cover, turn off the computer and wait several minutes until the computer is
cool.
Replacement procedure
1. Remove the power cord. See "Power cord" on page 24.
2. Remove the left side cover and right side cover. See "Left side cover and right side cover" on page 24.
3. Disconnect the front bezel power cable from the system board.
.
Chapter 5
CRU replacement
25