4. Pull the front bezel from the groove on the bottom of the computer and then remove the front bezel.
5. Perform the removal procedure in reverse to reinstall a new CRU.
Wire cover (for selected models)
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
Before you open the computer cover, turn off the computer and wait several minutes until the computer is
cool.
Replacement procedure
1. Remove the power cord. See "Power cord" on page 24.
2. Remove the left side cover and right side cover. See "Left side cover and right side cover" on page 24.
26
User Guide