Addition Function; Batch Function - DoCash 3040 Series User Manual

Addition Function

Addition can be performed by pressing the «ADD» button (when the «ADD»
indicator is on). In this case, removing the counted bills from the stack will
not clear the quantity counted and shown on the counter display. The next
bills placed in the hopper will be counted and added to the preceding quanti-
ty. The total amount of added bills will be shown on the counter screen. Press
the «ADD» button to close the function and clear the count.

Batch Function

The preset batch function can be performed by pressing the «BATCH» button
<when the «BATCH» indicator is on>. By default, when pressing the
«BATCH» button, the batch number is set to 100. By pressing it again, the
batch number can be changed <to 50 the first time and to 20 the second
time>. The batch number can be set in amounts between 1 and 999 by press-
ing + or - button. Press the + or - button for more than 0.25 sec, the number
will increase or decrease by 5 unit one time; while press the + or - with only a
single and fast strokes, it will increase and decrease 1 by 1. To clear this func-
tion, press the «BATCH» button until the indicator is off.
Under the batch counting mode, once the hopper is loaded, the machine will
start counting and stop when the counted quantity reaches the preset batch
quantity.
To repeat the batch counting operation under the same preset batch quantity,
just remove the counted bill from the stacker. The unit will batch the next
group of bills under the same settings.
If you wish to keep batching without removing the preset number, press the
«START» button.
www.docash.de
DC3040 Page 9