Counting Function - DoCash 3040 Series User Manual

Counting function

Once the bills are correctly placed in the hopper, the machine will start count-
ing automatically. The number of counted bill will be shown on the counter
display. Moreover, once the bills are removed from the stacker, the counter
display will clear and the batch display in turn will show the number of count-
ed bills instead.
Bills should be correct placed as indicated in the following steps.
Place the bills between the counting guides as shown in the figure1 and fig-
ure2. Swiftly, push the bills with a figure <see figure> to make them rest on
the top of the hopper plate, in the correct counting position.
Note: The counting mode can be changed between Automatic and Manu-
al. Press the «START» button for 3 seconds, if the batch display shows
«YES», the machine is in automatic counting mode;
if the batch display shows «NO», the machine is in manual counting mode,
under this mode, only pressing the «START» button after placement of bills
can the machine begin to count.
www.docash.de
DC3040 Page 8