Advertisement
D E S P A T C H A N D S T O R A G E
4.4 Delivery
The responsibilities of the consignee include but
are not limited to:
•
Checking the delivery for completeness and
freedom from damage (e.g. also formoisture
and its injurious effects)
•
Any deficiencies/transport damage noted
-
Are to be documented on the waybill
-
Reported to the shipper/carrier
Note
Always document major damage with
photographs.
4.5 Intermediate storage
Conditions for optimum intermediate storage:
1. Panels with basic packaging or without
packaging.
•
Dry and well ventilated storage room.Climate
in accordance with VDE 0670 Part 1000/IEC
62271-1
•
Room temperature not falling below -25℃
•
No other injurious environmental influences
•
Store the panels upright
—
Figure 4/1:
Preparation for
handling by crane.
Handling bracket
(1.18) to be
removed after
handling
—
Figure 4/1
> 60∗
ZX1.5-R
•
Do not stack panels
•
Panels with basic packaging
-
Open the packaging at least partially
•
Panels without packaging:
-
Loosely cover with protective sheeting
-
Sufficient air circulation must be preserved
•
Check regularly for any condensation
2. Panels with seaworthy or similar packaging
with internal protective sheeting:
•
Store the transport units
-
Protected from the weather
-
In a dry place
-
Protected from damage
•
Check the packaging for damage
•
Check the drying agent (see section 4.2)
-
On delivery
-
Later at appropriate intervals
•
When the service life from the date of
packaging has been exceeded (depending on
the project)
-
The protective effect of the packaging is no
longer ensured
-
Take action for further intermediate storage
1.19
1.23
1.18
23
Advertisement
