Fbt LIGHT Instructions For Use Manual page 32

EN
Label Application
No. of amplifi ers
System Standby amplifi er
Local emergency Local emergency
Emergency units Postazioni d'emergenza
VAIE 5500
See panel
32
Notes
In this panel it is possible to
set the attribution of a standby
amplifi er. The total number of
amplifi ers present in the system is
also shown automatically.
Panel for setting the default
broadcasting zones for emergency
messages.
Press 'Change' to change the
zone status, choosing between:
= active zone and
Blue
= inactive zone
Red
Premere 'Escape' per uscire dalla
schermata.
From this panel it is possible to
use the sub-menus to set the
confi gurations of the emergency
units connected to the VAIE 5500.
To confi gure the emergency units,
press 'Set unit with keys', then
press the 'Change' key to select
the model.
Then press 'Edit key' for
confi guring the keys.
Use the '<<' and '>>' keys to pass
from one key to another of the
unit. Move over the table using the
< and > keys.
Press 'Change' to change the
association of the zone with the
key, choosing between:
= Zone associated
Blue
= Zone not associated
Red
To leave the screen, press
'Escape'.