Table of Contents
Advertisement
D4) >> Control input
Screen page for managing the inputs being controlled (1 to 7).
Use the 'Next' and 'Prev.' Keys to move from one input to another.
Setting of the operating mode of the input (message, reset or de-activated) and of the relevant zones
Mode
(only if the item "Message input" is selected).
Enabling/disabling of control of the selected input.
Control
Impostazione della logica di attivazione dell'ingresso.
Logic
D5) >> Output
D6) >> Charger
On selecting the item >>Charger this screen page containing information about the internal batteries appears.
!
N.B.
In order to comply with the regulations, the "Energy save" function should always be enabled.
E)
Emergency messages
The default messages (Alert, Evacuation and Chime) are stored in the SD card mounted on the CPU. To access the
relevant screen, select the item set> SD CARD INSTALL from the CONFIGURATION menu. See page 34 for the relevant
activities.
VAIE 5500
Screen page for setting the output.
Battery capacity
Press 'Change' to select a value between 18, 26, 33 or 40 Ah. Please see details
on page 33.
Energy save (enabled/disabled)
For enabling/disabling the function allowing the batteries to go into the energy
saving mode in the absence of the mains power supply.
19
EN
Advertisement
Table of Contents
