TABLE OF CONTENTS PRODUCT INFORMATION Features................5 Parts..................6 Dimensions...............7 PRODUCT INSTALLATION Pre-Installation..............8 Installation................9 PRODUCT OPERATION How To Use..............13 MAINTENANCE Cleaning................14 Short Term Non-Use..........14 Warranty................15...
FEATURES • Relax fit panel • Comfort grip control dial • High-quality ABS material with full body panel • Premium quality metal inlet and installation parts • Dual nozzle • Ambient temperature bidet wash • Adjustable water pressure • Unified internal brass valve •...
PARTS DIMENSIONS Bidet attachment 15.5 in 8.66 in 4.33 in 2 Adjustable mounting brackets *T-Valve connector with rubber cone washer (7/8” x 7/8” x 3/8”) 12.4 in 27.5” Braided metal hose 2.44 in 2 Non-slip mats Teflon tape 3 Toilet bumpers *Alternate fittings available, contact support@biobidet.com...
PRE-INSTALLATION INSTALLATION Please be advised that the provided T-Valve 1. Remove the existing 2. Close the water supply should be installed at the fill valve under the toilet seat by locating the valve and flush the toilet toilet tank, NOT down at the water supply bolts and nuts, typically completely so that there coming from the wall.
Page 6
INSTALLATION (CONT.) 5. Attach the water supply 6. Connect the metal 9. Place the bidet on 10. Place the toilet seat hose that comes from hose we supplied the toilet with the back on the toilet over the water shut off to the to the open side of mounting brackets the bidet and secure...
Page 7
INSTALLATION (CONT.) TO USE For back wash, turn the control knob to the left towards the “ “ position. For front/feminine, turn the control knob to the right towards the “ “ position. The further the knob is turned, the higher the water pressure will be.
Page 8
CLEANING WARRANTY Your Bio Bidet is warranted against defects in materials or workmanship for Your SlimEdge is made with a high grade (1) year from the date of original purchase. Defective parts or a defective products returned to Bio Bidet will be repaired with new or comparable rebuilt parts fire-retardant ABS resin.
Page 9
Thank You Technical Support/Customer Service 7900 S Route 31 Crystal Lake, IL 60014 T: 847.458.2334 U.S TOLL FREE: 877.339.5214 support@biobidet.com www.biobidet.com...
Need help?
Do you have a question about the bioBidel Slimedge and is the answer not in the manual?
Questions and answers