4E
STEP 5:
Connect the stack to the purge valve through the filter for a longer runtime and a better
performance (5A-5E). If not, the gas out of stack may have a negative effect on the purge valve
after a long-time running. Connect the output of the purge valve to a place away from the stack in
case of the damage caused by the Hydrogen leakage.
5A
Manual_FCS-C100_V2.2_EN
4C
4D
Warning:The tube between the
hydrogen pressure regulator and
the fuel cell gas input is required to
be less than 30cm.
5B
16