Maintenance; Dear Customer - Scheppach UMF1600 Manual

Introduction
MANUFACTURER:
scheppach Fabrikation von Holzbearbei-
tungsmaschine GmbH
Günzburger Straße 69
D-89335 Ichenhausen

DEAR CUSTOMER,

We hope your new tool brings you much enjoy-
ment and success.
NOTE:
According to the applicable product liability
laws, the manufacturer of the device does not
assume liability for damages to the product or
damages caused by the product that occurs
due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized
service technicians,
• Installation and replacement of non-original
spare parts,
• Application other than specified,
Unpacking
• Open the packaging and remove the device
carefully.
• Remove the packaging material as well
as the packaging and transport bracing (if
available).
• Check that the delivery is complete.
• Check the device and accessory parts for
transport damage.
• If possible, store the packaging until the
warranty period has expired.
•
ATTENTION
The device and packaging materials are
not toys! Children must not be allowed
to play with plastic bags, film and small
parts! There is a risk of swallowing and
suffocation!
Technical Specifications
Dimensions (Lx-
WxH) in mm
Load in kg
Weight in kg
4 | GB
Heruntergeladen von manualslib.de
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
1000-1650 x 580 x 810-910
200
12.5
Handbücher-Suchmachiene

Maintenance

General maintenance measures
• We recommend that you clean the equipment
immediately after you use it.
• Clean the equipment regularly with a damp
cloth and some soft soap. Do not use cleaning
agents or solvents; these may be aggressive
to the plastic parts in the equipment. Ensure
that no water can get into the interior of the
equipment.
Storage
Store the device and its accessories in a dark,
dry and frost-proof place that is inaccessible
to children. The optimum storage temperature
is between 5 and 30˚C.