Chapter 2: Removing And Installing Components; Recommended Tools; Screw List - Dell Inspiron 5301 Service Manual

Removing and installing components
NOTE: The images in this document may differ from your computer depending on the configuration you ordered.

Recommended tools

The procedures in this document may require the following tools:
● Phillips screwdriver #0
● Phillips screwdriver #1
● Plastic scribe

Screw list

NOTE: When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and
then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.
NOTE: Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when
replacing a component.
NOTE: Screw color may vary with the configuration ordered.
Table 1. Screw list
Component Secured to
Base cover Palm-rest and keyboard
assembly
3-cell Battery Palm-rest and keyboard
assembly
4-cell Battery Palm-rest and keyboard
assembly
Solid-state drive System board
bracket
Fan System board
Display-assembly Palm-rest and keyboard
hinges assembly
Power-adapter port Palm-rest and keyboard
assembly
I/O board Palm-rest and keyboard
assembly
8 Removing and installing components
Screw type Quantity
M2x4 4
M2x5 4
M2x5 5
M2x3 1
M2x3 2
M2x2 3
M2x3 1
M2x3 2
2
Screw image