Palm-Rest And Keyboard Assembly; Removing The Palm-Rest And Keyboard Assembly - Dell Inspiron 5301 Service Manual

9. Connect the display cable to the system board and close the latch the secure the cable.
10. Place the wireless-card bracket on the wireless card.
The following table provides the antenna-cable color scheme for the wireless card that is supported by your computer.
Table 2. Antenna-cable color scheme
Connectors on the
wireless card
Main
Auxiliary
11. Replace the screw (M2x2.5) that secures the wireless-card bracket to the system board.
12. Align the screw hole on the left display hinge to the screw hole on the system board.
13. Replace the screw (M2x3) that secures the left display hinge to the system board.
Next steps
1. Install the solid state drive.
2. Install the heat sink.
3. Install the fan.
4. Install the 4-cell battery
5. Install the base cover.
6. Follow the procedure in

Palm-rest and keyboard assembly

Removing the palm-rest and keyboard assembly

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the 4-cell battery
4. Remove the speakers.
5. Remove the display assembly.
6. Remove the power-adapter
7. Remove the touchpad.
About this task
The following image indicates the palm-rest and keyboard assembly and provides a visual representation of the removal
procedure.
Antenna-cable color
White
Black
or the 3-cell battery.
After working inside your
Before working inside your
or the 3-cell battery.
port.
Silkscreen marking
MAIN
AUX
computer.
computer.
△ (white triangle)
▲ (black triangle)
Removing and installing components 49