Steps
1. Connect the power-adapter port cable to the system board.
2. Replace the screw (M2x3) that secures the power-adapter port to the palm-rest and keyboard assembly.
Next steps
1. Install the
base
cover.
2. Follow the procedure in
I/O board
Removing the I/O board
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
display
assembly.
About this task
The following image indicates the location of I/O board and provides a visual representation of the removal procedure.
40
Removing and installing components
After working inside your
Before working inside your
computer.
computer.