Autonics BM Series Quick Start Manual

Small and Light, Common Type

Features

● Easy to mount at a narrow space with small size
and light weight.
● Convenient to adjust the sensitivity by external
sensitivity adjustment control. (diffuse reflective type only)
● Easy to mount by screw type in mounting hole.
● Built-in reverse polarity protection circuit.
Please read "Safety Considerations"
in the instruction manual before using.

Specifications

Model
Sensing type
Sensing distance
Sensing target
Hysteresis
Response time
Power supply
Current consumption
Light source
Sensitivity adjustment
Operation Mode
Control output
Protection circuit
Indication
Connection
Insulation resistance
Noise immunity
Dielectric strength
Vibration
Shock
Ambient illumination
Environ-
Ambient temperature -10 to 60℃, storage: -25 to 70℃
ment
Ambient humidity
Material
Cable
Individual
Acces-
sories
Common
Approval
※ 3
Weight
※ 1: The sensing distance is specified with using the MS-2 reflector, and it is the same when using MS-5 (sold separately).
The distance between the sensor and the reflector should be set over 0.1m. When using reflective tapes, the reflectivity will vary by size
of the tape. Please refer to the " Reflectivity by Reflective Tape Model" table before using the tapes.
※ 2: Non-glossy white paper 200×200mm.
※ 3: The weight includes packaging. The weight in parenthesis is for unit only.
※ The temperature or humidity mentioned in Environment indicates a non freezing or condensation.
BM3M-TDT BM1M-MDT
Through-beam Retroreflective
※ 1
3m 1m
Opaque materials of Min. Opaque materials of Min.
Ø8mm Ø60mm
-
Max. 3ms
12-24VDCᜡ ±10% (ripple P-P: max. 10%)
Max. 45mA Max. 40mA
Infrared LED (940nm)
Fixed
Dark ON
NPN open collector output
●Load voltage: max. 30VDCᜡ ●Load current: max. 100mA ●Residual voltage: max. 1VDCᜡ
Reverse polarity protection circuit
Operation indicator: red LED
Cable type
Over 20MΩ (at 500VDC megger)
±240V the square wave noise (pulse width: 1㎲) by the noise simulator
1,000VAC 50/60Hz for 1 minute
1.5mm amplitude at frequency of 10 to 55Hz (for 1 min) in each X, Y, Z direction for 2 hours
500m/s² (approx. 50G) in each X, Y, Z direction for 3 times
Sunlight: max. 11,000㏓ incandescent lamp: max. 3,000㏓ (receiver illumination)
35 to 85%RH, storage: 35 to 85%RH
Case: acrylonitrile
butadiene styrene,
sensing part: polycarbonate,
Case: acrylonitrile butadiene styrene, sensing part: acrylic,
bracket: steel plate cold
bracket: steel plate cold commercial, bolt: steel chromium molybdenum,
commercial,
nut: steel chromium molybdenum
bolt: steel chromium
molybdenum, nut: steel
chromium molybdenum
Ø4mm, 3-wire, 2m (emitter of through-beam type: Ø4mm, 2-wire, 2m)
(AWG22, core diameter: 0.08mm, number of cores: 60, insulator out diameter: Ø1.25mm)
- Reflector (MS-2)
Fixing bracket,
Fixing bracket, 4M bolt: 2, 4M nut: 2
4M bolt: 4, 4M nut: 4
Approx. 240g Approx. 188g
(approx. 170g) (approx. 105g)
BM Series
(MS-5)
(MS-2)
※ MS-5, MST- is sold separately.
BM200-DDT
Diffuse reflective
※ 2
200mm
Transparent, translucent, opaque materials
Max. 10% at rated setting distance
Sensitivity adjuster
Light ON (Dark ON: option)
Adjuster driver
Approx. 156g
(approx. 88g)
SENSORS
CONTROLLERS
MOTION DEVICES
SOFTWARE
(MST- )
(A)
Photoelectric
Sensors
(B)
Fiber Optic
Sensors
(C)
LiDAR
(D)
Door/Area
Sensors
(E)
Vision
Sensors
(F)
Proximity
Sensors
(G)
Pressure
Sensors
(H)
Rotary
Encoders
(I)
Connectors/
Connector Cables/
Sensor Distribution
Boxes/ Sockets
A-69