Using Ac Adapter - Fora Vital Owner's Manual

1. Press the edge of the battery cover and lift it up to remove.
2. Remove the old batteries and replace with four 1.5V AA
size alkaline batteries.
3. Close the battery cover. If the batteries are inserted
correctly, you will hear a "beep" afterwards.
NOTE:
• Replacing the batteries does not affect the test results
stored in memory.
• As with all small batteries, these batteries should be kept
away from small children. If swallowed, promptly seek
medical assistance.
• Batteries might leak chemicals if unused for a long time.
Remove the batteries if you are not going to use the device
for an extended period (i.e., 3 months or more).
• Properly dispose of the batteries according to your local
environmental regulations.

USING AC ADAPTER

Connect AC Adapter to the Meter
Remove the AC Adapter from the Meter
EN-7
1. Connect the AC adapter plug to the
DC adapter jack of the meter.
2. Plug the AC adapter power plug into
an electrical outlet.
Press ON/OFF to start the
measurement.
1. When the meter is off, remove
AC adapter power plug from the
electrical outlet.
2. Disconnect the AC adapter plug from
the DC adapter jack of the monitor.