Troubleshooting Guide; Warranty Conditions - YILMAZ DK 502 User Manual

9.0 TROUBLESHOOTING GUIDE

Here are some recommendations for solving urgent problems. If the trouble cannot be solved, or if you have a problem other
than those described hereunder, please contact our technical service or your nearest dealer.
PROBLEMLER
The resistance does not heat
The clamps do not work. .
The guide plate does not move.
The brake piston does not work.
The heating plate does not move.
Machine does not weld or the
welding is not clean.

10 WARRANTY CONDITIONS

YILMAZ Machine Industry and Trade Limited Company,
conform to the international standards.
The guarantee is valid 24 months from despatch date and does not cover the electrical parts of the machine.
During this period:
- Any repair and replacement effected at our workshop is completely free of charge (only transport costs are at
customer's charge).
- For repair and replacement effected by our technician at the customer's site, we will invoice only the travel and
lodging costs for our technician.
The guarantee does not cover damages caused by:
- not respect of the rules indicated in the manual instruction book
- not correct voltage
- improper use or use not in accordance with what the Machine has been designed for
- use of non original tooling
- programming errors
- lack of cleaning and of ordinary maintenance by the customer
- transport or displacement (even inside the workshop)
- natural events (lightings, fires, floods)
The warranty does not cover, in any case, damages caused by the malfunction of the Machine
NEDENLER
No power supply to the
machine
The thermocouple does not
work
The temperature display
needs to be set.
he air pressure is too low
The profiles were cut in
different angles
The Teflon is dirty or torn.
guarantees that all machines have been tested and
ÇÖZÜM ÖNERİLERİ
Check the fuse, plug and socket.
Connect the thermocouple wire
Check the temperature display adjustment (245˚)
Check the air hose connections of the machine.
Adjust the air pressure at the conditioner.
Check the angles of the profile ends. The saw
blade might need to be sharpened.
The Teflon should be cleaned or replaced.
35