Advertisement
Fault Trapper™ Front Panel and Connections:
1
2
Connectors:
1.
Power Source - Usually attached to circuit breaker terminal or terminals using plug in terminal
blocks supplied. Screws on terminal block should be tightened to 7in-lbs.
Connectors (continued):
2.
Load - Wire or wires removed from circuit breaker attach here
3.
Supplied Leader cable connects 40amp adapter to Fault Trapper™.
Toll Free: 800-749-5783
Fault Trapper™
Transient Fault Location for Branch Circuit Breakers
5
8
3
Page 4 of 8
4
7
6
V 1.3 (draft)
Advertisement
