Advertisement
and 40amp branch circuits or less.
Turn off circuit breaker prior to attaching Fault Trapper™ and inline adapter to circuit to be
•
monitored.
Do not use around explosive or flammable gas.
•
Safety Information (cont.)
Use only test leads provided between Fault Trapper™ and In-Line adapter.
•
Before opening the battery door, remove cables from Fault Trapper™.
•
Always wear personal protective equipment when working with the Fault Trapper™
•
Do not open case of either the Fault Trapper of the In-Line Adapter with any cables connected to
•
it
Included Equipment:
Fault Trapper Main Unit
40amp In-Line Adapter
Banana Plug Leader Cable
Two Plug-in 2 Wire Terminal Blocks - 8 to 24 AWG (0.2 to 10mm
Optional Accessories:
Spare Plug-in 2 Wire Terminal Blocks
Adapters to Standard Plugs/Outlets for inline monitoring
Toll Free: 800-749-5783
Fault Trapper™
Transient Fault Location for Branch Circuit Breakers
2
)
Page 3 of 8
V 1.3 (draft)
Advertisement
