Controlling Your Tv With The Supplied Remote - Sony DVP-NS575P Operating Instructions Manual

Controlling Your TV with
the Supplied Remote
You can control the sound level, input source,
and power switch of your Sony TV with the
supplied remote.
TV
Number
buttons
You can control your TV using the buttons
below.
By pressing
TV [/1
VOL +/–
TV/VIDEO
Note
Depending on the unit being connected, you may
not be able to control your TV using all or some of
the buttons on the supplied remote.
62
VOL +/-
TV/VIDEO
You can
Turn the TV on or off
Adjust the volume of the TV
Switch the TV's input source
between the TV and other
input sources.
Controlling other TVs with the
remote
You can control the sound level, input source,
and power switch of non-Sony TVs as well.
If your TV is listed in the table below, set the
appropriate manufacturer's code.
1
While holding down TV [/1, press the
number buttons to select your TV's
manufacturer's code (see the table
below).
2
Release TV [/1.
Code numbers of controllable TVs
If more than one code number is listed, try
entering them one at a time until you find the
one that works with your TV.
Manufacturer Code number
Sony 01 (default)
Daewoo 04, 22
Hitachi 02, 04
JVC 09
LG/Goldstar 04
MGA/Mitsubishi 04, 13
Panasonic 19
Philips 21
RCA 04, 10
Samsung 04, 20
Sharp 18
Toshiba 07, 18
Notes
• If you enter a new code number, the code number
previously entered will be erased.
• When you replace the remote's batteries, the code
number you have set may be reset to the default
setting. Set the appropriate code number again.
• Depending on the unit being connected, you may
not be able to control your TV using all or some
of the buttons on the supplied remote.