Sony DVP-NS575P Operating Instructions Manual page 26

Is this player connected to an amplifier
(receiver) ? Select the type of jack you
are using.
YES
NO
9
Press X/x to select the type of jack
(if any) you are using to connect to
an amplifier (receiver), then press
ENTER.
Choose the item that matches the audio
connection you selected on pages 21 to
24 ( through
A
A
• If you connect just a TV and nothing
else, select "NO." Quick Setup is
finished and connections are complete.
B-1 C-1
• Select "LINE OUTPUT L/R
(AUDIO)." Quick Setup is finished and
connections are complete.
B-2 C-2
• Select "DIGITAL OUTPUT." The Setup
Display for "DOLBY DIGITAL" appears.
10
Press X/x to select the type of
Dolby Digital signal you wish to
send to your amplifier (receiver).
Choose the signal that matches the audio
connection you selected on pages 22 to
24 (
B
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DOWNMIX:
DIGITAL OUT:
DOLBY DIGITAL:
DTS:
48kHz/96kHz PCM:
B-2 C-2
• D-PCM (page 69)
D
• DOLBY DIGITAL (only if the
amplifier (receiver) has a Dolby Digital
decoder) (page 69)
11
Press ENTER.
26
LINE OUTPUT L/R (AUDIO)
DIGITAL OUTPUT
).
D
D
through ).
D
STANDARD
DOLBY SURROUND
D-PCM
D-PCM
DOLBY DIGITAL
"DTS" is selected.
12
Press X/x to select whether or
not you wish to send a DTS signal
to your amplifier (receiver).
Choose the item that matches the audio
connection you selected on pages 22 to
24 (
B-2
• OFF (page 69)
D
• ON (only if the amplifier (receiver) has
a DTS decoder) (page 69)
13
Press ENTER.
Quick Setup is finished. All connections
and setup operations are complete.
Enjoying the surround sound
effects
To enjoy the surround sound effects of this
player or your amplifier (receiver), set the
following items as described below for the
audio connection you selected on pages 22 to
24 (
B
default setting and does not need to be adjusted
when you first connect the player. Refer to
OFF
page 63 for using the Setup Display.
ON
Audio Connection (pages 21 to 24)
A
• No additional settings are needed.
B-1
• Set "DOWNMIX" to "DOLBY
SURROUND" (page 68)
• If the sound distorts even when the volume
is turned down, set "AUDIO ATT" to "ON"
(page 68)
B-2
• Set "DOWNMIX" to "DOLBY
SURROUND" (page 68)
• Set "DIGITAL OUT" to "ON" (page 68)
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DOWNMIX:
DOLBY SURROUND
DIGITAL OUT:
DOLBY DIGITAL:
DTS:
48kHz/96kHz PCM:
through
B D
C-2
through ). Each of these is the
D
C-1
C-2 D
OFF
STANDARD
ON
D-PCM
OFF
OFF
ON
).