Step 5: Connecting The Power Cord; Step 6: Quick Setup - Sony DVP-NS575P Operating Instructions Manual

Step 5: Connecting the Power Cord

Plug the player and TV power cords into an AC outlet.

Step 6: Quick Setup

Follow the steps below to make the minimum number of basic adjustments for using the player.
To skip an adjustment, press >. To return to the previous adjustment, press ..
1
Turn on the TV.
2
Press [/1.
3
Switch the input selector on your
TV so that the signal from the
player appears on the TV screen.
"Press [ENTER] to run QUICK SETUP"
appears at the bottom of the screen. If this
message does not appear, select
"QUICK" under "SETUP" in the Control
Menu to run Quick Setup (page 64).
4
Press ENTER without inserting a
disc.
The Setup Display for selecting the
language used in the on-screen display
appears.
5
Press X/x to select a language.
The player uses the language selected
here to display the menu and subtitles as
well.
ENTER
6
Press ENTER.
The Setup Display for selecting the
aspect ratio of the TV to be connected
appears.
7
Press X/x to select the setting that
matches your TV type.
◆ If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
◆ If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
• 16:9 (page 65)
8
Press ENTER.
The Setup Display for selecting the type
of jack used to connect your amplifier
(receiver) appears.
LANGUAGE SETUP
OSD:
MENU:
AUDIO:
SUBTITLE:
SCREEN SETUP
4:3 LETTER BOX
TV TYPE:
SCREEN SAVER: 4:3 LETTER BOX
BACKGROUND:
BLACK LEVEL:
BLACK LEVEL
(COMPONENT OUT)
MODE :
(PROGRESSIVE)
(page 65)
ENGLISH
ENGLISH
FRENCH
SPANISH
PORTUGUESE
4:3 PAN SCAN
16:9
: OFF
AUTO
25
,continued