Transport, Packaging And Storage; Transport Inspection; Packaging; Storage - Scholl CP 330 Instructions For Use Manual

Built-in hot or cold combiplate for central cooling system
Table of Contents

Advertisement

GBA C 6001 12 E
3
T
,
RANSPORT
3.1
T
RANSPORT INSPECTION
The delivery must be checked immediately upon receipt for completeness and transport damage.
In case of visible transport damage, do not accept the delivery, or only do so conditionally.
The extent of the damage on the transport has to be marked on the documents / delivery note. Initiate
complaint.
A complaint regarding hidden damage has to be reported, immediately after discovery, as claims for dam-
ages can only be asserted within the effective period for complaints.
3.2
P
ACKAGING
Do not throw away the cardboard packaging of your device. It might be useful for storage purposes, when
moving or if the device needs to be sent to our service centre in case of damage. The outer and inner pack-
aging material has to be removed from the device before use.
NOTE!
If you want to dispose of the packing, consider the regulations applicable in your country. Recycle re-
usable packing materials.
Please check that the device and its accessories are complete. If any part is missing, please contact our
customer service center immediately.
3.3
S
TORAGE
Keep the package closed until installation, under consideration of the indicated positioning and storage
markings.
Store the packages under the following conditions:
Do not store outdoors.
Keep dry and free of dust.
Do not expose to aggressive media.
Protect from direct sunlight.
Avoid mechanical vibrations.
ATTENTION!
The device shall not be turned upside down.
BA
Last revised 05-2021
PACKAGING AND STORAGE
Page 9 of 26
Mai 5, 2021
Rev. 12

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents