Installation And Operation; Safety Information - Scholl CP 330 Instructions For Use Manual

GBA C 6001 12 E
5 I
NSTALLATION AND OPERATION
5.1 S
AFETY INFORMATION
WARNING! Risk of electrocution!
The device must be installed by qualified professionals.

Device may cause injuries due to improper installation!

Before installation, check the data of the local power grid with the technical specifications of the
unit (see nameplate).

Connect the device only if they match! Follow the safety instructions!

The device may only be operated when connected to a properly installed single socket with protec-
tive contact. Don't use any multiply sockets. A safety switch is mandatory when installing a unit.

Do not pull the plug from the socket by the cable.

The power cord must not come into contact with hot parts.
WARNING! Hot surface!
During operation, some parts of the device become very hot. To avoid burns, do not touch hot parts!

Do not use this device if it is not working properly, is damaged or has been dropped.

Do not use any accessories and spare parts which are not recommended by the manufacturer.
These could pose a hazard to the user or cause damage to the device and cause personal injury,
and also void the warranty.

Do not lay the cable over carpets or other heat insulation. Do not cover the cable. Keep the cable
away from work areas and do not immerse in water.

Do not move the device during operation and do not tip it over.

Never heat food or liquids in sealed containers or bottles. This builds up a pressure which can
cause the container or bottle to explode.

The hot or cold combiplates must not be used as a storage area. Accidental activation or residual
heat can cause objects left there to melt or burn.

Make sure that the cable does not come into contact with heat sources or sharp edges. Do not
hang the cable off the table or counter.
BA
Last revised 05-2021
Page 15 of 26 Mai 5, 2021
Rev. 12