SpringWell CF+ Setup And Installation Manual page 5

IMPORTANT! The carbon media must be flushed on both tanks prior to install
Carbon Flush Instructions
Carbon Filter
Tank (CF+)
7) This step can only be
performed after the tank has
been soaked for 48 hours.
10) Run the hose and allow the
water to flush out the tank until
the water runs clear.
CF+ System
This step will require the materials listed below
Hose Bib
Assembly (x2)
8) Attach the Hose Bib
Assembly onto the inlet and
outlet ports.
11) Switch the hoses to now
run the water through the
outlet. Allow the water to
flow in the opposite
direction until it runs clear.
Questions? Call (800)-589-5592
Lawn Hoses (x2) and
access to a faucet
9) Attach the hoses to the tank.
The hose leading to the inlet will
be connected to a faucet. The
outlet hose will allow the water
to drain.
12) Remove the hose bib
assemblies from the Carbon
Filter tank.
5