Testing The System - SpringWell CF+ Setup And Installation Manual

Testing the System

69) Start with the bypass on to
check it for leaks prior to
flushing the combo system.
67) There is a slot in the
mounting bracket to store the
spanner wrench.
Congratulations, the
installation is now
complete.
CF+ System
70) Fully turn on the cold water
on a bathtub faucet in your
home.
Questions? Call (800)-589-5592
71) Turn the bypass off and allow
water to flush through the system.
Allow the system to flush for at
least 5 minutes. Check for leaks.
14