Table of Contents
Advertisement
Gas - Meritus
Important! Before installing, place the appliance on solid, flat, stable and horizontal
surface and connection availability.
The following instructions are intended for authorized and qualified installer. Before doing installation,
adjustment, and maintenance operations, the installer must follow local and legal regulations. Cut the
gas supply before doing any installation.
1.
This appliance is using gas. Gas services should be installed according to:
a. Local and international standards
b. Local recommendation, such as building standards and recommendation concern with
combustion
c. Directions and regulations from the gas and power supply companies
d. Regulation concern with prevention accident measures
2.
Remove all packaging material and protective coatings.
3.
Ensure gas supply is sufficient to operate this appliance.
4.
Install the appliance by using Qualified Gas Filter.
5.
Before testing, put the appliance in a good ventilated room and keep all flammable material away.
6.
Take a leakage test by using soapy water solution. Spread the soapy solution on joints and pipe
fitting. A leakage will be indicated by bubbles comes from the joints or pipefitting. Another way is
by looking at the gas counter. If there is no movement on the gas counter, it means no gas
leakage.
7.
Before cleaning or maintaining the appliance, please isolate gas supply to the safe place.
8.
Install the appliance by following Safe International Gas Standards.
NAYATI
Handling and Installing
WARNING!
Do not use free flame to find gas leak!
23
FRM-PDE-03-04
GB – Gas Range Series
20151125
Advertisement
Table of Contents
