Mitsubishi Electric EHPT20Q-VM2EA Service Manual page 69

From the previous page.
DISASSEMBLY PROCEDURE
(5) Remove the three screws securing the fixing
support for the manometer, remove the quick
connection at the rear of the manometer, and
remove the manometer together with the fixing
support.(Photo 11-10 and 11-11)
(6) Remove the two screws securing the manometer,
and then remove the manometer and nipple.(Photo
11-12 and 11-13)
Photo 11-10
screw
screw
Photo 11-11
Photo 11-12
screw
GCH15010
fixing support
manometer
manometer
manometer
screw
quick
connection
Photo 11-13
fixing support
screw
69
PHOTOS
nipple
manometer