Mitsubishi Electric EHPT20Q-VM2EA Service Manual page 57

DISASSEMBLY PROCEDURE
6-1. How to remove the Side panels (R,L)
(1) Remove the 12 screws of the top panel.(Figure 3)
(2) Remove the 10 screws of the rear panel.(Figure 4)
(3) Remove the 2 screws of the stay-pipe of the upper
side panel.(Figure 3 and 4)
(4) Remove the 4 screws of the fixing plate.(Figure 3)
(5) Remove the 3 screws of the base plate.(Figure 3)
Remove the 3 screws of the base plate.(Figure 4)
< CAUTION >
When removing panels, wear protective gloves to
prevent cuts and other injuries.
6-2. How to remove the Rear panel
(1) Remove the 3 screws of the top panel.(Figure 4)
(2) Remove the 3 screws of the base plate.(Figure 4)
GCH15010
PHOTOS
Figure 3
base plate
Figure 4
2 screws
rear panel
57
top panel
side panel
2 screws
fixing plate
2 screws
top panel
side panel
base plate