GRE CSPA Instruction Manual page 6

(1). Handle assembly (optional)
(a). lnstall V-shape clip into connector as Picture A.
(b). lnsert the handle as shown behind big department, according to needs,
looking for what kind of convenient way to clean the wall,ground,step and seat • A
of the POOL/SPA.
(c). lnsert the handle into the cleaner as B shown until the side pin on the
handle is secured in the Handle locking hale on the cleaner.
(d}. To ralease the handle, press into the side pin and pull out the handle.
(2).Telescopic pole (not included) assembly
(a).lnstall V-shape clip into connector as Picture A.
(b).lnsert the end (with one side pin) of the Pole Connector into the cleaner as
shown until its single side pin is secured in the Hand Locking Hale of the
cleaner. Slide and align the side hales of the telescopic with the side pins of the
Pole Connector.(as Picture B)
(c).To ralease the telescopic pole, press down two side simultaneously and pull
out the pole.
(3). Three Aluminum pole assembly (not included)
lnsert the threaded pole into battery turn-knob and turn clockwise until the pole tightened.
Then match the other two pales by male-female thread.
5. Cleaning the cleaner after using the electric cleaner:
(1) Rubbish in head: Press two buttons on body side and remove the suction head from
the body. Clean the suction head and insert it into the body again until buttons popping
from the hales.
WARNING!
Make sure cleaner is power off when servicing the cleaner.
(2) Rubbish in filter bag: one hand holds the body and turn clockwise by another hand to
remove the filter bag. Chean it and assemble the filter bag
again by turning anticlockwise.
WARNING!
Make sure cleaner is power off when servicing the cleaner.
4
B
1
-
B
r:,
•
A
-
s