Honda FJ500 Owner's Manual page 55

36V426020.book Page 53 Tuesday, June 25, 2013 10:43 AM
Inspection:
1.Check for damage, bent, or loose tines. If abnormality is found,
tighten or replace the damaged part.
2.Check the rotary setting bolt for looseness, tighten if necessary.
3.Check the rotary pins and retaining pins for damage or missing,
replace with new one if necessary (see pages 56 and 57)
NOTE:
Use genuine Honda parts or equivalent when replacing the rotary
tines.
TINE
ROTARY PIN ROTARY SETTING BOLT
RETAINING PIN
53