Honda FJ500 Owner's Manual page 49

36V426020.book Page 47 Tuesday, June 25, 2013 10:43 AM
4.Check that the spark plug washer is in good condition and thread the
spark plug in by hand to prevent cross-threading.
SPARK PLUG WRENCH
5.After the spark plug is seated, tighten with a spark plug wrench to
compress the washer.
NOTE:
After seating it by hand, tighten a new spark plug 1/2 turn with the
wrench to compress the washer. If you are reusing a plug, it should
only take 1/8–1/4 turn.
CAUTION:
The spark plug must be securely tightened. An improperly tightened
plug can become very hot and possibly damage the engine.
Never use a spark plug with an improper heat range.
47