Settings For The Display (Screen Setup) - Sony DVP-NC675P Operating Instructions (DVP-NC675P CD/DVD Player) Operating Instructions Manual

Settings for the Display
(SCREEN SETUP)
Choose settings according to the TV to be
connected.
Select "SCREEN SETUP" in the Setup
Display. To use the display, see "Using the
Setup Display" on page 64.
The default settings are underlined.
SCREEN SETUP
TV TYPE
Selects the aspect ratio of the connected TV
(4:3 standard or wide).
4:3 LETTER Select this when you connect a
BOX 4:3 screen TV. Displays a wide
picture with bands on the upper
and lower portions of the
screen.
4:3 PAN
Select this when you connect a
SCAN
4:3 screen TV. Automatically
displays the wide picture on the
entire screen and cuts off the
portions that do not fit.
16:9
Select this when you connect a
wide-screen TV or a TV with a
wide mode function.
4:3 LETTER BOX
4:3 PAN SCAN
16:9
66
TV TYPE: 4:3 LETTER BOX
SCREEN SAVER:
BACKGROUND: JACKET PICTURE
BLACK LEVEL:
BLACK LEVEL
(COMPONENT OUT)
MODE :
(PROGRESSIVE)
Note
Depending on the DVD, "4:3 LETTER BOX" may
be selected automatically instead of "4:3 PAN
SCAN" or vice versa.
SCREEN SAVER
The screen saver image appears when you
leave the player in pause or stop mode for 15
minutes, or when you play back a CD or DATA
CD (MP3 audio) for more than 15 minutes. The
screen saver will help prevent your display
device from becoming damaged (ghosting).
Press H to turn off the screen saver.
ON
ON
OFF
OFF
: ON
AUTO
BACKGROUND
Selects the background color or picture on the
TV screen in stop mode or while playing a
CD or DATA CD (MP3 audio).
JACKET
PICTURE
GRAPHICS A preset picture stored in the
BLUE
BLACK
BLACK LEVEL
Selects the black level (setup level) for the
video signals output from the jacks other than
COMPONENT VIDEO OUT.
ON
OFF
BLACK LEVEL (COMPONENT OUT)
Selects the black level (setup level) for the
video signals output from the COMPONENT
VIDEO OUT jacks.
You cannot select this when the player
outputs progressive signal and the
PROGRESSIVE indicator lights up in blue
on the front panel.
Turns on the screen saver.
Turns off the screen saver.
The jacket picture (still picture)
appears, but only when the
jacket picture is already
recorded on the disc (CD-
EXTRA, etc.). If the disc does
not contain a jacket picture, the
"GRAPHICS" picture appears.
player appears.
The background color is blue.
The background color is black.
Sets the black level of the output
signal to the standard level.
Lowers the standard black level.
Use this when the picture
becomes too white.