Settings For The Sound (Audio Setup) - Sony DVP-NC675P Operating Instructions (DVP-NC675P CD/DVD Player) Operating Instructions Manual

FRAME The picture, including subjects
that do not move dynamically,
is output in high resolution.
TRACK SELECTION (DVD VIDEO only)
Gives the sound track which contains the
highest number of channels priority when you
play a DVD VIDEO on which multiple audio
formats (PCM, DTS, or Dolby Digital
format) are recorded.
OFF No priority given.
AUTO Priority given.
Notes
• When you set the item to "AUTO," the language
may change. The "TRACK SELECTION" setting
has higher priority than the "AUDIO" settings in
"LANGUAGE SETUP" (page 65).
• If you set "DTS" to "OFF" (page 69), the DTS
sound track is not played even if you set "TRACK
SELECTION" to "AUTO."
• If PCM, DTS, and Dolby Digital sound tracks
have the same number of channels, the player
selects PCM, DTS, and Dolby Digital sound
tracks in this order.
MULTI-DISC RESUME (DVD VIDEO/
VIDEO CD only)
Switches the Multi-disc Resume setting on or
off. Resume playback point can be stored in
memory for up to 6 different DVD VIDEO/
VIDEO CD discs (page 31).
ON Stores the resume settings in
memory for up to six discs.
OFF
Does not store the resume
settings in memory. Playback
restarts at the resume point only
for the current disc in the player.
68
Settings for the Sound
(AUDIO SETUP)
"AUDIO SETUP" allows you to set the sound
according to the playback and connection
conditions.
Select "AUDIO SETUP" in the Setup
Display. To use the display, see "Using the
Setup Display" (page 64).
The default settings are underlined.
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DOWNMIX:
DIGITAL OUT:
DOLBY DIGITAL:
DTS:
48kHz/96kHz PCM:
AUDIO ATT (attenuation)
If the playback sound is distorted, set this
item to "ON." The player reduces the audio
output level.
This function affects the output of the LINE
OUT L/R (AUDIO) jack.
OFF Normally, select this position.
ON Select this when the playback sound
from the speakers is distorted.
AUDIO DRC (Dynamic Range Control)
(DVD VIDEO/DVD-RW only)
Makes the sound clear when the volume is
turned down when playing a DVD that
conforms to "AUDIO DRC." This affects the
output from the following jacks:
– LINE OUT L/R (AUDIO) jack
– DIGITAL OUT (COAXIAL or OPTICAL)
jack only when "DOLBY DIGITAL" is set
to "D-PCM" (page 69).
STANDARD Normally select this position.
TV MODE
Makes the low sounds clear
even if you turn the volume
down.
WIDE Gives you the feeling of being
RANGE at a live performance.
OFF
STANDARD
DOLBY SURROUND
ON
D-PCM
OFF
48kHz/16bit