GE GFD40 Owner's Manual page 23

Sensor Dry "Level"
4
The sensor continuously monitors the amount of moisture in the load. When the moisture in your clothes reaches
your selected dry level, the dryer will stop.
Note: Sensor dry "Level" only works for Mixed Loads,Cottons, Bulky Bedding, Easy Care, Delicates and
Speed Dry.
Dry "Temp"
5
You can change the temperature of your dry cycle.
High
Medium
Low
Extra Low
Start
6
Press to start a dry cycle. If the dryer is running, press it once and it will pause the dryer.
Press it again to resume the dry cycle.
7 "CLEAN LINT FILTER" (message)
(This message represents only a reminder and does not always appear when filter needs cleaning. The filter should be
cleaned after every drying cycle is complete.)
This message will disappear after the Start button is pressed. Even though you may have already cleaned the filter
(before or after the Power button has been pressed), the "CLEAN LINT FILTER" message will still be displayed until
the Start button is activated.
For regular to heavy cottons.
For synthetics, blends and items labeled permanent press.
For delicates, synthetics and items labeled Tumble Dry Low.
For lingerie and special-care fabrics.
23