Table of Contents
Advertisement
About the dryer control panel.
1
Power
Press to "wake up" the display. If the display is active, press to put the dryer in the standby mode.
NOTE: Pressing Power does not disconnect the appliance from the power supply.
2
Dry Cycles
The dry cycle controls the length and tumble speed of the drying process. The chart below will help you match
the dry setting with the loads.
Sensor Cycles
Mixed Loads
Cottons
Delicates
Speed Dry
DeWrinkle
Timed Dry Cycles
Air Fluff/No Heat
3
Time Dry
Use to set your own dry time. Time Dry is also recommended for small loads
To use Time Dry:
1. Turn dry cycle dial to Time Dry.
2. Increase the drying time by pressing the Time Dry button.
Note: This button only increases the time. When max time is reached, pressing the button again will reset
the counter to the lowest setting.
3. Select the Temp.
4. Close the door.
5. Press Start.
22
Description
For loads consisting of cottons and poly-blends.
For cottons and most linens. NOTE: Energy star® models are tested on Cottons whit
default settigs.
For lingerie and special-care fabrics
For small loads that are needed in a hurry, such as sports or school uniforms. Can also be
used if the previous cycle left some items damp, such as collars or waistbands.
Provides 20 minutes of drying to assist with dewrinkling items that are dry or slightly
damp. This cycle is not recommended for delicate fabrics.
Description
Provides 10 minutes of tumbling time without heat.
www.GEAppliances.ca
Advertisement
Table of Contents
